Smart Ink remanufactured ink cartridges for your Epson Expression Home XP-434 printer:

  • GREAT SAVINGS! Save up to $200 per purchase compared to original cartridges.
  • PLUG & PRINT! Installs perfectly in your Epson Expression Home XP-434 printer.
  • 2-YEAR MONEY-BACK GUARANTEE! It’s a no-risk purchase.

Smart Ink offers high-quality replacement cartridges for your Epson Expression Home XP-434 printers with a 2-year warranty and 24/7 customer support.
Using our Smart Ink remanufactured cartridges in your Epson Expression Home XP-434 printer does not void the printer’s warranty.


How to install remanufactured ink cartridges in the Epson Expression Home XP-434

What you need to know before the installation:
  1. Do not touch the chip during the installation, as this can lead to poor connection and non-recognition issues. 
  2. Do not remove the protective seal covering the ink port.
  3. Avoid mixing cartridges from different suppliers simultaneously – the printer may not recognize them properly. 
  4. The Smart Ink team strongly recommends using only high-quality ink from one producer to extend printer life.
How to install:


  • If your ink cartridge is empty, you will see a message on the LCD screen. Note which cartridges need to be replaced, then select “Proceed” and follow the instructions on the screen. 
  • If no message appears on the LCD screen, select “Setup” > “Maintenance” > “Ink Cartridge Replacement”.
  1. A Gently shake the new cartridge 4-5 times before opening.
    B Then remove the yellow tape. 
  2. Install the cartridge into the corresponding slot and push it down until it clicks into place. 
  3. Close the scanner unit and wait for 2-3 minutes while the printer is priming the ink. The message on the LCD screen will notify you when priming is complete. Attention: Do not turn off the printer during this process or you will waste ink.
  4. If you see a message saying the cartridge is incorrectly installed, remove and reinstall the indicated cartridge. Make sure it clicks into place, then close the scanner unit and press the OK button.